When using water-borne products such as: Glasurit 90 Line Basecoat, Metallics/Solids, Glasurit 176-72 1K Primer Filler, Glasurit 1109- Stone Chip and Underbody Protection, Glasurit 1109- Texture Finish the water used to clean working tools should be collected in suitable containers. These containers must not get in touch with solvents. Use of 700-7 Coagulating Powder: Add 2 or 3 scoops of 700-7 Coagulating Powder (approx. 75 g) per about 10 litres waste water (scatter the powder to distribute the particles evenly and to increase efficiency) and stir briefly. After a short interval, the solids will start to coagulate and can then be separated from the liquid by filtering, for example through filter mats or appropriate sieves (with a mesh size of about 80-100 microns). When the contaminant concentration in the waste water is very high (i.e., when the water has not become clear after about 15 minutes), add more 700-7 Coagulating Powder. There is no risk of overdosing with 700-7. The coagulated substance must be disposed of in the same way as solvent-borne paint waste. The clear, aqueous phase may be discharged into the public sewage system subject to local waste-water regulations. When you are not sure, consult the competent local authorities.
På vores supportplatform Glasurit Know-how kan du finde alle svar på dine spørgsmål om det og enhvert Glasurit produkt.
A brand of
