Poor hiding power
Substrate shows through. Old paintwork or body filler spots: are not hidden by the topcoat.
- Color of substrate not matched
- Color with poor hiding power (e.g., no heavy metal pigment)
- Topcoat overthinned
- Topcoat not stirred properly prior to use
- Paint layers applied too thinly
HOW TO AVOID
- For translucent colors in particular (pearl effects in a three-layer system), a uniform substrate is required.
- For colors with poor hiding power, use Glasurit 285-95 HS Tintable Filler (see image below). Alternatively, use primer filler/surfacer mixed at a level of brightness matching the topcoat, such as Glasurit 285-55 HS VOC Primer Filler black mixed with 285-65 HS Primer Filler white, or, with the wet-on-wet method, Glasurit 285-39 VOC Non-Sanding Filler dark grey mixed with 285-38 VOC Non-Sanding Filler white.
- Stir the paint material thoroughly and thin only as specified.
- Spray sufficiently thick coats and allow for sufficient flash-off times between coats (solid colors 50-70 µm, metallic effects 15-25 µm).
After drying, sand down and apply a new finish.